Fiber Optic Converter

Ikelite Ikelite


New product

Fiber Optic Converter Expand

Converts the electrical bulkhead of any Ikelite DS strobe into a fiber optic port.

More details

968,00 kr Recc. Retail: 1 209,66 kr

Manufacturer's Description:

The Fiber Optic Converter features heightened sensitivity for the most reliable fiber optic triggering of Ikelite DS strobes. This Converter is required for use with SEA&SEA or Nauticam housings with internal electrical-to-optical flash triggering devices. These devices translate the camera's electrical signals into a series of LED flashes which are much less bright than a traditional built-in camera flash.

Compared to the Fiber Optic Adapter (1st Gen), upgraded electronics make this Converter capable of accurately reading these signals for fast and reliable triggering with these devices. Like the original Fiber Optic Adapter (1st Gen), the Fiber Optic Converter is also compatible with any system where the camera's built-in flash can be seen by a fiber optic cord.

For remote optical slave triggering off another flash without a cable, consider the Optical Slave Converter, see below.

Pre-Flash Auto Detection
The Fiber Optic Converter automatically configures itself for compatibility with both pre-flash and non pre-flash camera modes. No setting of small switches or confusion over number of pre-flashes. Simply turn on your strobe and take one picture to configure.

Strobe Triggering
This adapter is a manual exposure (non-TTL) trigger only. The strobe's output may be adjusted using the manual power settings built into the strobe (varies by model).

An individual Fiber Optic Converter is needed for each strobe. Use of two strobes requires two Fiber Optic Converters. The Fiber Optic Converter supports DS50, DS51, DS125, DS160 and DS161 strobes.

Fiber Optic Cord Compatibility
Ikelite 4501 Fiber Optic Coiled Cord
INON Optical D Cable "Non-wireless type" L-Connector
Sea&Sea Fiber Optic Cable (L-type) Product No. 50107
Olympus UW Fiber Optic Cable PTCB-E02
Nauticam Optical Fiber Cable No. 26211 Nauticam to INON
Nauticam Optical Fiber Cable No. 26212 Nauticam to Sea&Sea

What's Included
Silicone lubricant
28 mm diameter x 69 mm
Weighs 45 g
Depth rating 90 m

Spare Parts
0301.12 Connector protector
0136.13 O-ring
0184.2 Silicone lubricant 2 cc recloseable tube



Download (67.72k)

Ikelite manufactures underwater housings for both basic compact cameras as well as more advanced SLR and camcorders.

Ikelite is famous for designing and manufacturing the best underwater strobes on the market and a wide range of special accessories for underwater photography.